国产SUV精品一区二区88,国产免费MV大全视频网站,日韩精品在线观看,久久精品丝袜高跟鞋

Hello, welcome to the official website of Shenzhen Deemno Technology Co., Ltd.
Product center
Products
Electronic accessories solution
Products
Current position: Home Products Bonding queue Flame retardant
Thermal queue
Irry queue
Three-proof
Bonding queue
Quick-dry queue
Structural queue
Pad queue
Custom queue
  • Flame retardant
  • Flame retardant
  • Flame retardant
Flame retardant
Name:Flame retardant
Model:DML1335

This adhesive is made of silicone composites, fast drying time, single component, open tube, easy to use. The paste, the gelatin is maintained, does not collapse, self-cuisine, and functions to fix the insulation, the case where the fixed welding foot is applied, and it will play a buffer protection. Resistance and temperature (-60 ∽220oC) excellent performance, flame retardant reaches UL94-V0 grade.

×
Provide relevant information and send samples for free!
×
Custom service

(I. Overview:

This product is a single-component silicone rubber which uses high-end raw materials developed by high-grade raw materials. It reacts at room temperature with moisture in the air, solidifying into a high toughness elastomer. It is an excellent metal and non-metallic adhesive and fixing glue. The rubber is good with metal, glass, ceramics, plastic, etc., has good bonding, and the surrounding environment of the use occasion will not cause pollution. The colloid after curing, has excellent physical and electrical properties of silicone materials.

If you still have questions if you pass through the end, please click the two-dimensional code to find a small video of the flame retardant in the shake number, and you can see the whole picture of this product.

(B) characteristics

● Single group, easy to use, can match the equipment pipeline operation;

● Good thixotropism, extrusion speed;

● Flame retardant performance is the UL94-V0 level;

● Adhesive advantageous, good adhesion to plastics, Mara belt, PCBA, metal and ceramics, etc .;

● Elastomer, good anti-shock impact and deformation ability;

● Superior electrical properties, maintain excellent anti-dielectric strength under various harsh conditions;

● High-temperature and low temperature performance is excellent, and it still does not change, harden or crack at -60 ° C, which is not soft, degraded at high temperatures at 220 ° C.

(3) Typical use:

Dedicated to the adhesive fixation of electronic components

(4) Technical performance

Before curing parameters:

Test items

unit

Numerical value

color

----

White white

Exterior exterior

----

Cream

Deth density

g/cm3(25℃)

1.5 ± 0.1

Table time

Refers to MIN (25 ° C)


Removal parameters

Measurement project

unit

Numerical value

hardness

Shore A

50 ~ 70

Dielectric constant

(60Hz 25℃)


Tensile Strength

MPa


Dielectric strength

kV/mm(25℃)

\\u003e 10

Fracture elongation


\\u003e 100

Shear intensity (aluminum aluminum)

MPa


Volume resistivity

Oh; cm

≥1.2 × 1014

temperature range

° C

-60 ~ 220

 

(5) How to use:

Substrate preparation:

All surfaces must be cleaned, remove oil and wash off all contaminants that may affect the bonding ability, suitable cleaning solvents include: isopropanol, acetone and methylketone. In many substrates, such as glass, metal, and most engineering plastics, it can be bonded, but materials that are not good in normally bonding, such as PTFE, Polyethilic, polyproprind, PET, and others. A similar material should be treated.

2. Operation method

Extruding the gel from the packaging tube, direct dispensing to the side of the components that need to be bonded, standing for 12-24 hours at room temperature, and absorbs the trace water vapor in the air. The adhesive element cannot be moved before the colloid is completely cured.

3. Curing process and time

(1) The colloid contacts moisture in the air, and the surface of the colloid surface is subjected to a certain period of time.

(2) The colloid is gradually solidified by the surface. 25 ° C and 50% relative humidity The solidified depth of the colloid is 2-5 mm. Deep part, especially if it is not easy to get in a place where moisture is required, it takes a longer time to curing, and when the humidity is low, the curing time will extend relatively. When using or packaged, the user is best to wait for a long time to ensure that the colloid is solidified.

(3) If you need to be placed in a fully sealed narrow space, try to extend the colloid feet so that the adhesive is completely cured.

4. Compatibility

The adhesive releases trace of small molecules during curing. When in fully sealed narrow space, the electrical insulation performance may be lowered in the initial stage of dispensing, please extend the colloidal feet or increase small molecule release pathway to ensure The small molecule in the colloid is released as much as possible.

 

5. Storage and validity period

The product is in a cool dry place, the shelf life of the unopened original container is 6 months (calculated at the production date).

Shenzhen Dimenglong Technology Co. , Ltd.

Address: Building 1, Block C, 2nd floor, Huiye Science and Technology Park, Guanguang Road, Tangjia community, Fenghuang Street, Guangming District, Shenzhen City

  • 13923434764
Links
Copyright ? Shenzhen Deemno Technology Co., Ltd.  ICP No. 2022011903
国产99在线 | 亚洲| 荡货 喂奶 h| 老妇bbw搡bbbb搡bbbb| 真实的国产乱xxxx在线四季| 妺妺窝人体色WWW看人体| 宝贝腿开大点我添添公口述| 99久久无色码中文字幕| 45分钟做受片免费观看| 国产凸凹视频熟女a片| 国产免费无码一区二区视频 | 精品亚洲麻豆1区2区3区 | 国产AV一区二区三区日韩| 骚虎视频在线观看| 丰满中国少妇和黑人玩| 亚洲精品国产精品乱码视色| 亚洲AV成人精品网站在线播放| 少妇啊灬啊灬用力啊快小熊| 久久久久久久人妻无码中文字幕爆 | 妈妈的朋友电影| 国产精品丝袜黑色高跟鞋| 粗大的内捧猛烈进出少妇| 国产av无码| good在线观看| 99久久99久久免费精品小说| 久久无码人妻丰满熟妇区毛片| 美女动态高潮激烈xxoo270| 粗大的内捧猛烈进出a片| 护士的色诱2在线观看免费| YW尤物AV无码国产在线观看| 18岁禁止入内| 国产寡妇xxxx猛交| 波多野结衣在线| 无码国产精品一区二区免费vr | 熟妇的奶头又大又粗| 小受被用各种姿势进入n视频| 国产精品国色综合久久| 他揉捏她两乳不停呻吟人妻| 500篇艳妇短篇合午夜人屠| 日本一区二区三区| 黎明破晓前电视剧全集免费观看| 激烈 痉挛 抽搐 潮喷 MP4|