国产SUV精品一区二区88,国产免费MV大全视频网站,日韩精品在线观看,久久精品丝袜高跟鞋

Hello, welcome to the official website of Shenzhen Deemno Technology Co., Ltd.
Product center
Products
Electronic accessories solution
Products
Current position: Home Products Irry queue Electronic silicon gel
Thermal queue
Irry queue
Three-proof
Bonding queue
Quick-dry queue
Structural queue
Pad queue
Custom queue
  • Electronic silicon gel
  • Electronic silicon gel
  • Electronic silicon gel
  • Electronic silicon gel
  • Electronic silicon gel
  • Electronic silicon gel
  • Electronic silicon gel
  • Electronic silicon gel
Electronic silicon gel
Name:Electronic silicon gel
Model:DML2131-137

This silicon gel is a fluidless silicon material that is room temperature, or can be heated. Composed of AB dual fluid, there is highlighted adhesion performance, so moisture-proof is extremely good; and is extremely soft, easy to reduce mechanical stress and tension caused by mechanical, hot and hot impact and vibration. The shape is like jelly, the surface has viscous, high transparent, and the thickness limit can clearly see the potted electronic components; while insulation, excellent electrical performance, low stress, no solvent in the product, no cure by-products, Excellent materials for electronic products under stringent conditions.


×
Provide relevant information and send samples for free!
×
Custom service

product description
Electronic silicone gel is a silicone potting adhesive that is adhesive after curing, has good elasticity, good toughness, so that self-repair ability, automatic healing after the external force is fed, restored to the originality of the same system; Compared with the addition, it is good to adaptive, resulting in highlighting waterproof moisture-proof performance, is an excellent potting rubber material, which is favored by many customers who seek domestic alternatives, the lack of DC527, WACK 612, Map 3062 and so on.

If you still have questions when you pass through the end, please click the two-dimensional code to find the small video of the silicone gel, and can see the whole picture of the silicone gel.

parameter parametric

state status

Test items

unit

parameter parametric

Remark remark

Before curing

color


Transparent transparent

A component

Transparent transparent

B component

Viscosity

25oC, MPA S


A component


B component

density

25oC,g/cm3

0.98 ± 0.05

A component

0.98 ± 0.05

B component

The mixing ratio


1: 1

Operating time

25oC RH 50%, min


Adjustable

Curing time

25oC RH 50%, HR


60oC,Hr


After curing

color


Transparent gel

After mixing

Thermal Conductivity

w/m·k


Coefficient of expansion coefficient of dilatation

μm / (m, oC)

≦ 200

Elongation at break



Dielectric strength

Kv/mm(25oC)


Volume resistance

(DC500V), O. CM

1.0 × 1015

Instructions

Mix

The product is provided in a two-component form to mix the A component with the B component with a predetermined weight ratio. After a component is thoroughly mixed with B components, gently agitate to reduce the amount of air mixed. Vacuum sputum treatment before perfusion can reach the most ideal rolled state.

 

2. Applicable period / operation time

The curing reaction starts at the beginning of the mixing process. The initial curing phenomenon is gradually increased, and then the gel is started, and then transformed into an elastomer. The definition of the applicable period is that the viscosity increases to the original twice as component A and B (mains and curing agents).

 

3. Processing and Curing

After the product is fully mixed, it can be directly injected / dispensing to a component that requires curing, and the components should be vacuum-deprived after using the product pot. The product can be cured either at room temperature (25 ° C) or heated.

 

4. Compatibility

In some cases, this product will not be able to achieve the most desirable curing effect when contacting some plastic or rubber, and the surface of the solvent is cleaned or baked with a slight baked above the curing temperature can be resolved.

Some chemicals can inhibit curing, and the following materials should pay special attention: an organic substance containing N, P, S, and an ionic compound containing Sn, Pb, Hg, Bi, AS or the like; compounds containing hydrine and polyalkyl groups; condensation Types and their contaminated molds and tools.
 

5. Repairability

When producing electrical / electronic equipment, it is desirable to recover waste or damaged products. It is difficult or impossible to remove and reperfuse the non-organic silicon rigid potting material without significant damage to the internal circuit. The use of Di Moni silicone potting rubber can easily select removal, repair, or complete replacement, and re-injecting new potting rubber in the repair site.

When the silicone elastomer is removed, the unwanted material can be torn or removed from the area to be repaired using a sharp blade or a knife. For elastomers adhered to the portion, it is preferable to remove the substrate or circuit using a mechanical method such as scraping or friction.

Before reperfuse the potchic adhesive, it is necessary to use a sandpaper to fill the surface of the cured pottex, and then wipe with a suitable solvent. This helps to enhance the adhesion, combining the repaired materials with existing pottings.

 

6. Operational precautions

1.a, b Components must be stirred after 2-5 minutes after opening the original package, avoiding the effects of product effects due to the layered precipitation caused during transportation and storage.

2. When mixing, consolidate agitation, especially the stirring;

 

Storage and validity

When there is no open seal below 25 ° C, the product from the date of production is 6 months. If it is overdue, it can be used normally after test inspection.

 

Packaging specifications

AB 20kg / barrel


FAQ
Take a look, avoid stepping on the thunder

Shenzhen Dimenglong Technology Co. , Ltd.

Address: Building 1, Block C, 2nd floor, Huiye Science and Technology Park, Guanguang Road, Tangjia community, Fenghuang Street, Guangming District, Shenzhen City

  • 13923434764
Links
Copyright ? Shenzhen Deemno Technology Co., Ltd.  ICP No. 2022011903
人妻夜夜添夜夜无码av茄子视频 | 久久精品亚洲AV无码四区毛片| 女人被狂躁g点高潮喷水| 日本强伦姧人妻一区二区| 欧美极品jizzhd欧美| 国产综合一区二区三区| BT√天堂资源种子在线官网| 护士在办公室里被躁中文字幕 | 最近中文字幕免费mv视频7| 成人小说亚洲一区二区三区 | 色偷偷人人澡人人爽人人模| 暴虐营妓np宫交| 成人av视频免费观看| 最近的中文字幕在线MV视频| 人妻 日韩 欧美 综合 制服| 9lporm自拍视频区九色| 把腿张开被舔得死去活来在线| 亚洲熟妇AV一区二区三区| 国产白嫩护士被弄高潮| 成人乱人乱一区二区三区| 无码gogo大胆啪啪艺术| 国产精品99久久久久久| 777久久精品一区二区三区无码| 美女与野兽免费观看| 99久久久无码国产精品性| 丰满熟妇乱又伦在线无码视频| 公交车被CAO得合不拢腿| 亚洲AV成人无码网天堂| А√天堂资源地址在线官网| 自己撅起来乖乖挨c烂h| 亚洲电影在线观看| 天天做天天爱夜夜爽毛片毛片| 成人午夜精品无码区久久| 亚洲欧洲精品a片久久99| 新婚警花太紧和局长出差小说| 欧洲-级毛片内射| 日韩无码专区| 樱桃视频影院在线播放| 免费看美女裸露双乳洗澡视频| 丰满多毛的大隂唇特写图片| 白嫩白嫩bbwbbwbbw|