国产SUV精品一区二区88,国产免费MV大全视频网站,日韩精品在线观看,久久精品丝袜高跟鞋

Hello, welcome to the official website of Shenzhen Deemno Technology Co., Ltd.
Product center
Products
Electronic accessories solution
Products
Current position: Home Products Bonding queue Flame retardant
Thermal queue
Irry queue
Three-proof
Bonding queue
Quick-dry queue
Structural queue
Pad queue
Custom queue
  • Flame retardant
  • Flame retardant
  • Flame retardant
Flame retardant
Name:Flame retardant
Model:DML1335

This adhesive is made of silicone composites, fast drying time, single component, open tube, easy to use. The paste, the gelatin is maintained, does not collapse, self-cuisine, and functions to fix the insulation, the case where the fixed welding foot is applied, and it will play a buffer protection. Resistance and temperature (-60 ∽220oC) excellent performance, flame retardant reaches UL94-V0 grade.

×
Provide relevant information and send samples for free!
×
Custom service

(I. Overview:

This product is a single-component silicone rubber which uses high-end raw materials developed by high-grade raw materials. It reacts at room temperature with moisture in the air, solidifying into a high toughness elastomer. It is an excellent metal and non-metallic adhesive and fixing glue. The rubber is good with metal, glass, ceramics, plastic, etc., has good bonding, and the surrounding environment of the use occasion will not cause pollution. The colloid after curing, has excellent physical and electrical properties of silicone materials.

If you still have questions if you pass through the end, please click the two-dimensional code to find a small video of the flame retardant in the shake number, and you can see the whole picture of this product.

(B) characteristics

● Single group, easy to use, can match the equipment pipeline operation;

● Good thixotropism, extrusion speed;

● Flame retardant performance is the UL94-V0 level;

● Adhesive advantageous, good adhesion to plastics, Mara belt, PCBA, metal and ceramics, etc .;

● Elastomer, good anti-shock impact and deformation ability;

● Superior electrical properties, maintain excellent anti-dielectric strength under various harsh conditions;

● High-temperature and low temperature performance is excellent, and it still does not change, harden or crack at -60 ° C, which is not soft, degraded at high temperatures at 220 ° C.

(3) Typical use:

Dedicated to the adhesive fixation of electronic components

(4) Technical performance

Before curing parameters:

Test items

unit

Numerical value

color

----

White white

Exterior exterior

----

Cream

Deth density

g/cm3(25℃)

1.5 ± 0.1

Table time

Refers to MIN (25 ° C)


Removal parameters

Measurement project

unit

Numerical value

hardness

Shore A

50 ~ 70

Dielectric constant

(60Hz 25℃)


Tensile Strength

MPa


Dielectric strength

kV/mm(25℃)

\\u003e 10

Fracture elongation


\\u003e 100

Shear intensity (aluminum aluminum)

MPa


Volume resistivity

Oh; cm

≥1.2 × 1014

temperature range

° C

-60 ~ 220

 

(5) How to use:

Substrate preparation:

All surfaces must be cleaned, remove oil and wash off all contaminants that may affect the bonding ability, suitable cleaning solvents include: isopropanol, acetone and methylketone. In many substrates, such as glass, metal, and most engineering plastics, it can be bonded, but materials that are not good in normally bonding, such as PTFE, Polyethilic, polyproprind, PET, and others. A similar material should be treated.

2. Operation method

Extruding the gel from the packaging tube, direct dispensing to the side of the components that need to be bonded, standing for 12-24 hours at room temperature, and absorbs the trace water vapor in the air. The adhesive element cannot be moved before the colloid is completely cured.

3. Curing process and time

(1) The colloid contacts moisture in the air, and the surface of the colloid surface is subjected to a certain period of time.

(2) The colloid is gradually solidified by the surface. 25 ° C and 50% relative humidity The solidified depth of the colloid is 2-5 mm. Deep part, especially if it is not easy to get in a place where moisture is required, it takes a longer time to curing, and when the humidity is low, the curing time will extend relatively. When using or packaged, the user is best to wait for a long time to ensure that the colloid is solidified.

(3) If you need to be placed in a fully sealed narrow space, try to extend the colloid feet so that the adhesive is completely cured.

4. Compatibility

The adhesive releases trace of small molecules during curing. When in fully sealed narrow space, the electrical insulation performance may be lowered in the initial stage of dispensing, please extend the colloidal feet or increase small molecule release pathway to ensure The small molecule in the colloid is released as much as possible.

 

5. Storage and validity period

The product is in a cool dry place, the shelf life of the unopened original container is 6 months (calculated at the production date).

Shenzhen Dimenglong Technology Co. , Ltd.

Address: Building 1, Block C, 2nd floor, Huiye Science and Technology Park, Guanguang Road, Tangjia community, Fenghuang Street, Guangming District, Shenzhen City

  • 13923434764
Links
Copyright ? Shenzhen Deemno Technology Co., Ltd.  ICP No. 2022011903
精品少妇人妻AV免费久久洗澡| chinesegv无套粗大激情| 成人无码一区二区三区| 老女人做爰全过程免费的视频| 国产精品久久久久久久久久免费| 亚洲AV片不卡无码久久| 武则天肉体大战野史dvd| 成人妇女免费播放久久久| 久久久久亚洲AV片无码| 中文字幕精品一区二区精品| 99精品人妻无码专区在线视频| 国产成人涩涩涩视频在线观看| 草草浮力影院| 玩弄japan白嫩少妇hd小说| 少妇高潮无套内谢麻豆传| 色欲国产麻豆一精品一AV一免费| 国产精品第一页| 掉入男人世界的女人阅读| 亚洲日韩AV无码| 精品国产一区二区三区久久 | 色多多app| 日韩欧美群交P片內射中文| 97色偷偷色噜噜狠狠爱网站| 成人激情五月天| 中文乱码字慕人妻熟女人妻 | 扒开双腿疯狂进出爽爽爽动态照片| 国产精品99久久久久久宅男| 亚洲中文字幕久久无码精品| 美国十次导航| 五月槐花香电视剧全集免费| 被闺蜜男朋友强肉h高干| 日韩毛片无码永久免费看| 亚洲精品乱码久久久久久不卡| 255是多少码的鞋子男| 中文乱码字慕人妻熟女人妻| 少妇口述与子做过爱| 日本55丰满熟妇厨房伦| 夜夜爽一区二区三区精品| 久久精品国产亚洲AVAPP下载| 激情国产AV做激情国产爱| 最近中文字幕在线中文一页|